Standard hard-wired cameras

Products

RE-TCC6
Color hard-wired camera
 

Further information

Technical data
Lenses
Accessories

Tutorial on cabling the cameras and CCTV theory

Prices
Price list

Place an order   
How to order

Professional quality - unbeatable price

datasheet

   color 420 lines
   CCD Sharp 1/4"
   min. illum. 1 lux
   audio
   mirror

rear panel

Cameras RE-TCC6 are standard resolution,  dependable cameras suitable for standard quality CCTV systems.
These cameras are based on SHARP CCD, which provides a considerable cost saving compared with similar SONY chip still providing high quality video, suitable for most CCTV systems.
The cameras can be connected directly to a TV or monitor, or integrated into a RadioEye® wireless system, using external transmitters (RE-DTX1).

The cameras
The cameras are compatible with all the DSE lenses. The lens must be ordered separately, as well as the 230V/12V power adaptor and mounting bracket, if required.
While choosing the lens please consider that the size of the CCD in this camera is 1/4".
State of the art DSP digital electronics ensures outstanding color rendering and a signal-noise ratio of over 48 dB, guaranteeing clear, crisp images. 420 TV line resolution is optimal for most domestic and SOHO CCTV system
RE-TCC6 come with built-in microphones and RCA audio output.

Controls
On the back of the camera, as shown in the picture, there are a few connections and controls:

Camera controls
On the back of the camera there are 3 micro-switches to optimize the image according to the conditions:
Back light compensation (BLC ON/OFF). This should be activated when filming a subject in front of a source of strong light, like a window, which would put the subject into the shade.
Auto-iris or electronic shutter  (AI-EE). Automatic shutter control should be activated if you are using a fixed lens. It must remain off if you use an auto-iris lens.  
Mirror Reverse the image for rear view.
AWB on/off The automatic white balancing can be switched on or off (see tutorials).

The lenses
These cameras are supplied without a lens in order to enable you to fit the lens most suited to the size and luminosity of the site. Choose the lens for your camera on the lens page. All DSE lenses can be fitted onto this type of camera, including AUTOIRIS, VARIFOCAL and power ZOOM lenses. These lenses have a C/CS type mount.

Wiring and installation
These cameras can be connected directly to a TV or a  monitor using a cable. You can use the 20 m cable RE-CT1 (video+audio+power), or for longer distances RG59 coaxial cable, like product CV-RG59 which is supplied in 100 m coils.
The cameras take a 12 VDC power supply. To convert 220V mains power into 12 VDC a 220VAC/12VDC adaptor such as RE-AL4S is used. If you need to control more than one camera you can use a device such as a  switcher, quad splitter or multiplexer. Modern digital video recorders do not require these control devices and cameras can be directly connected to their video input terminals.
By connecting the camera to an external transmitter such as RE-DTX1, you can integrate it into a RadioEye® wireless system. For those with less experience, or needing to refresh their knowledge, the tutorials section contains numerous lessons which explain how to wire and install a hard-wired CCTV system correctly.

The product includes
  Camera without lens
  Adaptor ring for C/CS mount
  Tool for back focal adjustement

PLEASE NOTE: Hard-wired cameras are supplied without a lens, power adaptor, or bracket, which  can be purchased separately.