The fire/intruder detector camera

These WiFi spy cameras are hidden inside fake security sensors, similar to those commonly used in homes or businesses. You can choose between the fake smoke detector, designed for ceiling installation, and the fake motion sensor, intended for wall mounting. These hidden cameras can record video and audio onto a memory card inserted inside. They work connected to your home WiFi, allowing you to access them anytime via your smartphone and receive notifications.

Up to 6MP high video resolution

These hidden investigation cameras deliver a video resolution of 4MP or 6MP at 25 fps, on par with our top-of-the-line video surveillance cameras. Keep in mind that 2MP resolution—also known as 1080P or Full HD (1920×1080 pixels)—is the current standard for high-definition digital TV. The video resolution of these models is higher than that offered by most of our other spy cameras, resulting in greater detail, especially when zooming in.

High brightness pin-hole lens

These mini cameras are equipped with a high-brightness hidden pinhole lens, perfectly concealed within the standard appearance of the sensor. This type of disguise allows the use of slightly larger and brighter lenses compared to those used in our other spycams. As a result, these sensor-concealed hidden cameras deliver the highest image quality for covert recording. All models allow the camera angle to be adjusted to perfectly frame the room.

Invisible IR and Audio

(DK-PIR1-TUY only)

Only the alarm-sensor models are equipped with invisible infrared LEDs for night vision in complete darkness. Thanks to the IR LEDs, the camera is able to record clearly in total darkness, up to a distance of 10 meters. This is a feature that is very rarely found in investigative cameras of this kind. The IR LEDs automatically activate as light levels drop and remain completely invisible, even when observed up close. These alarm-sensor models are also equipped with two-way audio.

Storage on SD card with H265 compression

The spy micro cameras in this range record video footage onto a removable internal Micro SD memory card. The Micro SD card is not included. To use these cameras, you must purchase a separate Micro SD card with a capacity up to the maximum supported by the camera. Thanks to H.265 video compression, you can store many hours of recorded footage. Video files are stored in encrypted format and can only be played back and downloaded in MP4 via the dedicated app.

Motion detection

These cameras support 3 recording modes: continuous, timer and motion detection. In CONTINUOUS mode the camera records 24/7. Once the memory is full the oldest files are automatically overwritten. In TIMER mode the device start recording automatically at a certain time fo the day. These cameras also support the MOTION DETECTION function which allows you to record only if there is movement in front of the lens. It is a very convenient function to avoid wasting precious memory space by recording irrelevant scenes.

Mains power supply

These cameras are designed to operate using a constant power supply, with an adapter that must remain plugged in (not included). This allows the camera to stay operational 24/7, just like a real CCTV surveillance system. These mains powered cameras are an excellent solution for equipping your premises with hidden surveillance that is always active and easy to set up.

Based on TUYA platform

All products in this range are based on TUYA home automation platform and its IOT app Smart-Life which is very popular all over the world. With this system you can fully automate your home , simply by purchasing devices and connecting them to your WiFi in a matter of seconds. Supervise your properties with our 220V cameras or battery cameras; control your lights, pumps, irrigation with our remote controls or interact with people with our intercoms. Our Smart Home devices are wireless, easy to install and really inexpensive.

Connect to your WiFi without PC

Unlike our Onvif cameras for CCTV systems, these cameras are designed to be installed without the aid of a computer and without knowing anything about networks or IP. You just need a mobile phone to connect the cameras to your home wifi in a few minutes. Download the free Smart Life app on your smartphone and show the QR code that pop up on the screen in front of the camera. In just a few easy steps your camera is ready to work via the Internet. The P2P cloud server avoid difficult router settings and support any Internet connection, even 4G or satellite.

Monitor via Internet by PC

Although these home automation cameras are mainly designed for control by smartphone or tablet, you can also monitor via computer. It can be useful to comfortably control your home while you are at work. No software is required to access from a computer, just use any browser and connect to protect-eu.ismartlife.me logging in with your smartphone. All browser are supported: Chrome, Firefox or even Safari for Mac.

Save videos on Cloud

These cameras can save recorded video in the event of an intrusion on a cloud server via the web. Unlike other feature of Smaertlife, that are free, this service has an annual fee. You can playback the video recordings at any time, via app or computer. You can choose among several subscription options at a reasonable fee.

Supporting ONVIF protocol

Unlike most spy cameras you find online, our investigative cameras support not only the Tuya protocol but also the Onvif protocol. You can add them to one of our surveillance NVRs, together with standard IP cameras. This is a very important feature for professional use, as it allows you to connect these cameras to a video recorder and integrate the hidden camera into a complete CCTV system. DSE is one of the very few companies in Italy that is a member of the international ONVIF association, which brings together the leading manufacturers in the industry and sets the communication standard for IP security devices.

Hardwired cabling option

Like all devices based on the Tuya platform, these cameras are designed to operate primarily via a Wi-Fi connection. However, they also feature a wired RJ45 network port, which can be used by enabling the ONVIF protocol in the settings. Unlike our other spy and smart home cameras, when using a wired connection you can also manage the camera via a web browser or with an RTSP client such as VLC within your local network.

Make a perfect hidden camera

To make an effective covert shot, you need to choose a favorable position for your camera. By their nature, these cameras are hung to the ceiling by screws or by means of the sticker included. The lens angle can be adjusted to get full coverage of the room. These spycams are absolutely unsuspected objects that normally do not draw attention.

Check your WiFi coverage

To choose the best place for your wifi camera you must first check the coverage of your WiFi signal. In fact, these devices must connect to your WiFi network in order to work. You can easily check the coverage of your wifi network with your mobile phone just checking the available signal where you want to install the device. If you can surf the Internet smoothly with your phone, then the signal is good for your smart home device. In general, a normal WiFi Hot Spot, such as your Internet router, allows you to reach devices up to 3 or 4 rooms away. If your WiFi does not cover the area where you would like to install the device, you can extend your WiFi network by installing additional Hot Spots or WiFi repeaters.